5592 1.0MM

Technical Data September 2014 3M™ Thermally Conductive Silicone Interface Pads 5591 and 5591S Product Description 3M™ Thermally Conductive Silicone Interface Pad 5591 and 5591S are highly conformable, slightly tacky silicone elastomer pads. These interface pads are designed to provide heat transfer path between heat generating components and heat sinks, heat spreaders or other cooling devices. Features and Benefits • Good thermal stability of the base polymer with excellent softness of the thermal pad. • Good thermal conductivity in an ultra soft silicone polymer base. • The product tack is such that a mechanical means to support the pad in a final assembly is required. Product Construction Color Pad Type Pad Thickness* Primary Filler Type Top Liner / 5591S Film Type (film stays with pad) Release Liner Thickness / Type 3M™ Thermally Conductive Silicone Interface Pad 5591 and 5591S White Filled Silicone Polymer 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm Ceramic 3M pad 5591S – 12 µm PET Film Base Liner 4 mils (100 µm) Transparent PET / Optionally, 60 µm Embossed PE film with transparent blue color is available. *Note: 3 M pad 5591 not available in 0.5 mm thickness. Optional thickness > 2.0 mm are available. Contact your 3M representative for more information. Polyester Film (12 µm) = 3M pad 5591S (No film carrier on 3M pad 5591) Filled Silicone Elastomer Release Liner 3M™ Thermally Conductive Silicone Interface Pads 5591 and 5591S Typical Physical Properties and Performance Characteristics Note: T he following technical information and data should be considered representative or typical only and should not be used for specification purposes. Property Product Number1 Value Method 3M™ Thermally Conductive Silicone Interface Pads 5591 and 5591S Thermal Conductivity (W/m-K) 1.0 W/m-K Operating Temperature Range2 Hardness Shore 003 3M Test Method with low pressure (